Komatsu — FUSIBLE LINK

OPERATION FUSIBLE LINK If the starting motor does not turn when the ignition switch is turned to the ON position, there is probably a disconnection in fusible link (1) or (2). Open the battery box cover on the right side of the chassis, then check and replace the fusible link. (1): Fusible link for 24 V power supply (2): Fusible link for starting motor Fusible link (2) is taped to the nearby wiring harness. When carrying out inspection or replacement, check the wiring harness number.

Remark A fusible link refers to the large-sized fuse wiring installed in the high current flow portion of the circuit to pro- tect electrical components and wiring from burning, in the same way as an ordinary fuse. 2-72 PC300LC/HD-7E0