Komatsu — PREPARATIONS FOR MOVING THE MACHINE

OPERATION MOVING, STOPPING AND PARKING THE MACHINE Before traveling or moving the machine, it is important to know all the control functions and relevant safety regulations for the area you will be traveling or moving the machine in. If you will be traveling on state or local roadways, observe all traffic safety laws. Travel at a safe controllable speed. PREPARATIONS FOR MOVING THE MACHINE Before operating the steering levers, check the direction of the track frame. If the sprocket is at the front, the operation of the travel levers is reversed. When moving, check to be sure the area around the machine is safe, and sound the horn before moving.

Do not allow anyone in the area around the machine. Remove all obstacles from the travel path of the machine. The rear of the machine is a blind spot, so be particularly careful when travel in reverse. If the lever is moved inside the deceleration range, engine speed will rise suddenly. Operate the levers carefully. For machines equipped with a travel alarm, check to be sure the warning equipment works properly. 1. Location of travel controls. 2. Set swing lock switch (1) to the ON (actuated) position and confirm that swing lock monitor lamp (2) lights up. PC300LC/HD-7E0 2-97