OPERATION LOADING THE MACHINE 1. Never lift the machine on to the trailer body with the work equip- ment, loss of control or a rollover situation may result. 2. Always load on level stable ground using the properly sized ramps with the trailer wheels chocked. Maintain a safe distance from the edge of the road. 3. Properly apply the brakes on the trailer and put blocks under the tires to ensure that the trailer does not move. Then fix the ramps in line with the centers of the trailer and the machine. 4. Make sure that both ramps are at the same level. Make the slope of the ramps a maximum of 15є. Set the distance between the ramps to match the center of the tracks. 5.
Set the travel speed selector switch (6) to the LOW position. To switch the travel speed, press travel speed selector switch (5). The travel speed is displayed as ( Lo , Mi , or Ohioan the monitor display (6). 6. Turn auto deceleration switch (7) OFF and operate the fuel control dial to set the engine speed to low idle. Each time auto deceleration switch (7) is pressed, it switches OFF ON OFF in turn. When auto deceleration switch (7) is turned OFF, the display monitor (8) goes out. 2-122 PC300LC/HD-7E0