Komatsu — UNLOADING THE MACHINE

OPERATION UNLOADING THE MACHINE 1. Never lift the machine off the trailer body with the work equipment, loss of control or a rollover situation may result. 2. Always unload on level stable ground using the properly sized ramps with the trailer wheels chocked. Maintain a safe distance from the edge of the road. 3. Load and unload on firm level ground only. Maintain a safe distance from the edge of a road. 4. Apply the trailer brakes securely, then put blocks (1) under the tires to prevent the trailer from moving. Set left and right ramps (2) parallel to each other and equally spaced to the left and right of center (3) of the trailer. Set the angle of installation (4) a maximum of 15 o .

If the ramps bend a large amount under the weight of the machine, put blocks under the ramps to prevent them from bending. 5. Remove the chains and wire ropes fastening the machine. 6. Start the engine. Warm the engine up fully. 7. Set the lock lever to FREE position (F). 8. Turn the travel speed selector switch to low speed travel (Lo lamp lights up). Press travel speed selector switch (5) to set the travel speed. The travel speed ( Lo, Mi, Hi ) is displayed on monitor display (6). PC300LC/HD-7E0 2-127