Komatsu — REPLACE FUEL PRE-FILTER CARTRIDGE

MAINTENANCE Bleed the air as follows: 15. Add fuel to the fuel tank until full (to FULL mark on the fuel gauge). 16. Insert the key in the ignition switch and turn the key to the ON position (B). The electric priming pump is actuated. 17. Hold the key at the ON position (B) for 30 seconds, then return it to OFF position (A) and wait for 10 seconds. 18. Repeat Steps 16 and 17 four times. 19. Start the engine, check to be sure there is no leakage of fuel from the filter seal surface or water separator mounting surface, then run for approx. 10 minutes at low idling. 3-54 PC300LC/HD-7E0