Komatsu — WHEN USING GENERAL ATTACHMENT SUCH AS CRUSHER

OPTIONS, ATTACHMENTS ATTACHMENT OPERATIONS Do not rest the foot on the pedal and depress it, when the auto deceleration switch is in ON position. The engine speed rises all of sudden and the attachment will move suddenly and cause serious dam- age or injury. Do not put your foot on the pedal except when operating the pedal. If rest your foot is the pedal during operations, and it is depressed by accident, the attachment may move suddenly and cause serious damage or injury. Operate the attachment as follows. WHEN USING BREAKER With the working mode set to B mode, set the lock pin to FREE posi- tion (b) for the front only, and depress the front of the pedal to actuate the breaker. 1.

Set the working mode to B mode. PRECAUTIONS WHEN USING Check that the stop valve is at the FREE position. Check that the working mode is B mode. When considering whether it is necessary to install an accumula- tor for the attachment circuit, contact the attachment manufacturer and then decide. For other precautions when handling the breaker, follow the instruction manual from the breaker manufacturer and use the breaker correctly. The deterioration of the hydraulic oil when using the breaker is much faster than for normal operations, so reduce the maintenance interval for the hydraulic oil and element.

WHEN USING GENERAL ATTACHMENT SUCH AS CRUSHER With the working mode set to P mode or E mode, set the lock pin to FREE position (c) for both the front and rear, and depress the front or rear of the pedal to actuate the attachment. 1. Set the working mode to P mode or E mode. 2. If it is necessary to adjust the oil flow, see "Setting Oil Flow (PAGE 2-29)". PRECAUTIONS WHEN USING Check that the stop valve is at the FREE position. Check that the working mode is P mode or E mode. For other precautions related to the handling of attachment, follow the explanation in the operation manual provided by the attachment manufacturer to operate the attachment correctly. PC300LC/HD-7E0 5-15