Komatsu — SPECIFICATIONS

OPTIONS, ATTACHMENTS LONG TERM STORAGE If the equipment is not to be used for a long time, do as follows. Set the stop valve in the LOCK condition. Install the plug and O-rings to the valves. Set the lock pin at the LOCK position. If there is no breaker or general attachment installed, operating the pedal may cause overheating and other problems. SPECIFICATIONS Hydraulic specifications Max. flow at merge: 270 x 2 l/min. (71.3 gal/min.) Safety valve relief set pressure for service valve A port: 220 kgf/cm 2 (3,124 psi) (except B mode) B port: 250 kgf/cm 2 (3,550 psi) (except B mode) Safety valve cracking pressure for service valve A port: 175 kgf/cm 2 (2,485 psi) (except B mode) B port:

205 kgf/cm 2 (2,911 psi) (except B mode) Safety valve relief set pressure for service valve: 220 kgf/cm 2 (3,124 psi) (B mode) Safety valve cracking pressure for service valve: 175 kgf/cm 2 (2,485 psi) (B mode) 5-16 PC300LC/HD-7E0