Komatsu — SELECT SWITCH

OPERATION SELECT SWITCH These switches (7) are used when adjusting the E mode set values or when adjusting the oil flow when an attachment is installed. ADJUSTING E MODE SET VALUES When the E mode set values are adjusted, the engine output is adjusted, making it possible to improve the fuel consumption in E mode. 1. Press selector switch (7). 2. The monitor display screen switches to the selection screen shown on the right. Use UP switch (9) and DOWN switch (10) to select the E mode set values (A), then press Enter switch (11) to accept the change. (The selected monitor is highlighted in black.) 3. The monitor display screen switches to the adjustment screen shown on the right.

Use UP switch (9) and DOWN switch (10) to select the set values. The relationship between fuel consumption and production is as follows. E0 : Default (maximum emphasis given to production over fuel consumption) E1 : Economy mode adjustment 1 (priority given to production) E2 : Economy mode adjustment 2 (priority given to fuel consumption) E3 : Economy mode adjustment 3 (maximum emphasis given to fuel consumption over production) Remark The closer the selection is made to E3, the better the fuel consumption becomes, but the production is reduced accordingly. 4. Press enter switch (11) to accept the set values. 2-28 PC300LC/HD-7E0