OPERATION When working mode is B mode 1. The monitor display screen switches to the selection screen shown on the right. Use UP switch (9) and DOWN switch (10) to select the desired oil flow. 2. After selecting the oil flow, press Enter switch (11). 3. The monitor display screen switches to the oil flow setting screen shown on the right. Use UP switch (9) and DOWN switch (10) to select the desired oil flow. One segment is approxitmatly 20 liter (5.28 US gal)/min. 4. After fine adjustment of the oil flow is completed, press Enter switch (11) to accept the change. 5. The monitor display screen switches to the selection screen shown on the right.
Press return switch (8) The monitor display screen returns to the standard screen. Remark Even when the ignition switch is turned OFF, the oil flow set by the above operation remains as the set value when the engine is started next. BACK SWITCH Press this switch (8) when in the maintenance mode, brightness/con- trast adjustment mode, or select mode. The screen will return to the previous screen on the monitor display. UP SWITCH, DOWN SWITCH Press up switch (9) or down switch (10) when in the maintenance mode, brightness/contrast adjustment mode, or select mode to move the cursor on the monitor display (colors of selected monitor are inverted) up, down, left, or right. 2-30 PC300LC/HD-7E0