. OPERATION TROUBLESHOOTING WHEN ENGINE RUNS NOTICE WHEN ENGINE DOES NOT RUN 3 - 139 When starting to move, the operator of the to wing machine should give a signal to the operator of the mach ine being towed . If the towing machine moves off while the brakes ar e still applied on the machine being towed, a force greater tha n the permissibl e load will be applied to the towing portion and the I f the tires are stuck in mud and the mac hine cannot escape under its own power, if there is no p roblem i n the travel system and the steering wheel can be o perated, tow the machine as follows. 1. One operator sits in the operator's c ompartment of the towing machine.
towing machine and to the towing pin of the machine to be towed. 2. Fit wire rope to the towing pin of the towing machine and to the towing pin of the machine When doing this, always check that the wire rope is of ample strength to take the weight of the machine being towed. ne. he problem machine slowly. mum of 2 km/h. 3. Start the engine of the towing machi 4. Operate the towing machine to tow t The towing speed should be a maxi 5. The operator of the problem machin e should operate the steering to follow the direction of t he towin g machine. 6. Move the problem machine to a posit ion where it can travel under its own power, then stop th e towing operation. 7.
Set the parking brake on the machin e being towed to PARKING. ng pins. 8. Remove the wire rope from the towi 1. Put blocks under the wheels. 2. If the emergency steering cannot be used, remove the hydraulic hoses to the steering cylin ders (lef t and right: 2 each). ugs. er to catch the oil. nes that are equal in size or larger than the machine to be towed. After removing the hoses, fit blind pl Fit a container to the steering cylind 3. Prepare 2 towing machines. For the towing machines, use machi nes that are equal in size or larger than the machine t 4. Position towing machines in front of and behind the machine to be towed, and fit wire rope to the fr ont o r rear of the towing machines.
When doing this, always check that the wire rope is of ample strength to take the weight of the machine being towed. achine to be towed. asing the parking brake, see "WHEN PARKING BRAKE HAS BEEN E 3-140)". e to be towed. mum of 2 km/h. ed, it is possible to steer the machine with the emergency steering. The ss than 90 seconds. 5. Release the parking brake on the m For details of the method of rele ACTUATED IN EMERGENCY (PAG 6. Remove the blocks from the machin 7. Tow the machine slowly. The towing speed should be a maxi If the emergency steering can be us maximum length of use should be le