Komatsu — GUIDES TO MAINTENANCE

. MAINTENANCE GUIDES TO MAINTENANCE nuts, bolts, or tools inside the machine. LOCKING INSPECTION COVERS: WARNING HANDLING HIGH-PRESSURE HOSES,PIPING: WARNING 4 - 6 DO NOT DROP THINGS I When opening insp ection windows or the oil filler p ort of the tan k to carry ou t inspection, be careful not to drop opped inside the machine, it ma y cause dam age and/or m alfunction of the machine, and will u drop anything inside the mach ine, always remove it im mediately. Do not put unneces sary things in your pockets. Ca rry only thing s which are necessary fo AVOID MIXING OILS:

If a different brand or g rade of oil has to be added, drain the old oil an d replace all the oil with th e new brand o r grade of oil. Never mix differ ent brand or grade of oil. After opening the inspec tion cover, secure it in position with the lock bar. I f it is not locke d and a gust o f wind blows du ring the inspection operation, the inspection cover may shut suddenl y and cause i njury. Lock inspection cover securely into position with the lo ck bar at ins pection or m Fix the hoses, tubes, g uards, and piping cushions securel y in position. If they are loose , they will vibra te during opera tion and rub against other part to spurt out and caus s.

There is danger that will cause w ear or make ho les in the hos es or tubes, all owing high-pre ssure oil e a fire. If the oil or fuel leaks from the high-pressure hoses or p iping, there is danger of fire or serious pe rsonal injury ca used by defective operation. I operations and tighten your Komatsu distribu • Damaged or leaking h • Frayed or cut covering • Covering swollen in pl • Twisted or crushed m • Foreign material embe f any loose hose or piping mounts are found, o r there is oil o r fuel leaking from t he moun ts, stop to the specified tightening torque. If any damage o r deformation of the hoses or piping is found , consult tor.

If the following conditions are f ound, replace If there is any leakage of oil or fuel from the hoses or piping, tighte n to the spec ified tighteni ng torque. For details of the specified tighte 4-19)". ning torque, see "STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS (PAGE are damaged, replace them. IGHTENING (PAGE If the hoses or piping