. MAINTENANCE SERVICE PROCEDURE CHECK FAN BELT FOR WEAR AND REPLACE WARNING REPLACING 4 - 71 When carrying out inspectio n and maintenance, alway s hang a "DO NO T OPERATE " warning sign on the gear shift lever. If a nyone operat es the machine when someone is carrying out i nspection , that p erso n may b e caught in the ro tating or moving parts of the machi ne and suffer serious injury. f cutting your fingers off in the pulley groove. In addition, there is danger o f cutting your fingers off in the pu lley groove. Chec k the V-belt, and rep lace the V-belt if the c ondition is as f ollows.
y Th e V-belt is in contac t with the bottom of the groove of eac h pulle Th e V-belt is worn and has sunk below the o utside di amete r of the pulley Th e V-belt is cracked or peeling When replacing the V-be 1. L oosen lock nut (1) a nd then loosen adjust screw (2 emove two bolts (3) an be moved. and then loosen bolt (4) until bracket (5) The V- belt stretches as it is used, so the length is dif ferent fro m that of a new b elt. If new belts and old belts are used togeth er, the l oad will be applie d only to the new V-be lt, and this may cause th e V-belt t o break. 4.
D te b isconnect the grea nsion pulley lever t olt down hard with a se hose at portion (6), screw a bolt in apped hole (7) (M12 x 1.75) and pull the crowbar.