Komatsu — ABS SYSTEM CHECK AFTER STARTING ENGINE

. ATTACHMENTS, OPTIONS HANDLING ANTI SKID BRAKE SYSTEM (ABS) ABS MAIN SWITCH the ABS switch lights up. REMARK The ABS system checks the ABS control valve, ABS check is completed in approx. 12 seconds. 6 - 20 Use this ABS switc em ON or OFF When portion (A) of the switch is pressed, the A BS is actuated the ABS actuation l amp on the machine monito r lights up.

When portion (B) o f the switch is pressed, the ABS is cance ion lamp on the machine m onitor goes out When the head lam ps are turned on, the icon in side portion (B ABS OPERATION L AMP This ABS actuation lamp (3) lights up when the ABS main swit ch is ON, and the system det ects slipping caus ed by the wheels locking, and actuates the ABS. CHARACTER DISPL If any problem occu ction code is d isplayed on t his c haracter di ABS SYSTEM CHECK AFTER STARTING ENGINE After starting the en gine, check the ABS syste m. 1. Set the machin e in the following condition. If the machine i Oarking brak Brake oil pre ABS main s Action code s not in the following conditi is not displayed on characto 2.

Keep the brake pedal depressed until the A BS system ch eck is completed. 3. Keep the ABS s ystem check switch presse d for approx. 1 second. The ABS opera When any prob code. For detai repair. tion lamp flashes and the A BS check syste m starts lem occurs in ABS system, the action cod e is displayed on isplay. Check the error ls, see "TROUBLESHOOTING (PAGE 6-22)". Please your Komatsu distributor to carry out you distributo stem cannot be c e, oil pressur e switch, and oi l pressure sensor. This p stops, the c heck is complete d. Release the brake