Komatsu — PRECAUTION WHEN USING ABS SYSTEM

. ATTACHMENTS, OPTIONS HANDLING ANTI SKID BRAKE SYSTEM (ABS) OPERATION OF ABS The ABS system can be actuated when the ABS switch is turned ON. PRECAUTION WHEN USING ABS SYSTEM WARNING The ABS is not actuated when the retarder control lever or brake pedal are operated. the secondary brake function is maintained, but when the secondary 6 - 21 The ABS system automatically control s slipping caused by locking of the wheels, and shorten s the braking distance. n snow-covered or slippery road surfaces When the tires tend to lock, if the retard er control lever is operated, or the brake pe dal is depre ssed, the AB S system is actuated. When this happens, the A BS actuation lamp lights up.

If t he accelerator pedal is depressed, Even if the ABS system is used, the stopp ing distance on wet road surfaces is longer th an the stoppi ng distance o n dry road surfaces. Reduce the travel speed when tr aveling on wet surfaces to reduce the stopping distance. If a ny mistake is made i n the stopping distance, it may lead to serious p ersonal injury. When traveling on roads with an ex tremely low friction coefficient (icy roads, e tc.) or whe n traveling u p or d own a steep hill, it may not be possible t o ensure safe travel even with the ABS in stalled. it.

In such cases, carry out maintenan ce on the road surface before traveling on After turning the ABS main switch O N, it takes a short time for the preparation of the ABS operation, s o the ABS is not actuated for 2 seconds. Turn the ABS main switch ON beforehand if it i s to be actu ated. It is possible to carry out normal tra vel even when the ABS main switch is OF F. Howeve r, be extrem ely careful about the machine slipping to the si de when traveling on slippery road surfac Even if there is a failure in the ABS s ystem, it is possible to carry out normal trav el. Howeve r, be extrem ely careful about the machine slipping to the sid e when traveling on slippery road surfaces .

If any prob lem occurs i n the ABS system, the system is automatically canceled, display the action code on cha ractor displa y. When AB S system canceled, so the condition become the same as for a machine which does no t have the ABS installe d. brake is actuated, even if the wheel When equipping the machine with a wireless system, install it as for as possibl e from the s ystem equipment and wiring. In addition, when equipping the mac hine with a wireless system, check carefu lly that the wireless and operating system do not break any laws regul ating use of the airwaves.