EPA07 MBE 4000 OPERATOR'S MANUAL (or equivalent sulfamic acid/sodium carbonate cleaner) and flushed. POWER COOL cleaners are listed in Table POWER COOL Cooling System Cleaners Coolant Inhibitor Test Intervals The coolant inhibitor level should be checked at the intervals listed in Table 16. Table 16 Required Coolant Inhibitor Test Intervals Supplemental Coolant Additives for Fully Formulated Coolant — The concentrations of some inhibitors will gradually deplete during normal engine operation. SCAs replenish the protection for cooling system components. The coolant must be maintained with the proper concentration of SCA. Detroit Diesel Power Cool maintenance SCAs are recommended.
HOT COOLANT To avoid scalding from the expulsion of hot coolant, never remove the cooling system pressure cap while the engine is at operating temperature. Wear adequate protective clothing (face shield, rubber gloves, apron, and boots). Remove the cap slowly to relieve pressure. The proper application of SCA will provide: pH control. If topping off is needed, add coolant which is identical to the initial fill coolant. Restored inhibitor levels to prevent corrosion. All information subject to change without notice.
107 DDC-SVC-MAN-0041 Copyright © 2009 DETROIT DIESEL CORPORATION Service Application Inhibitor Test Interval Long Haul — Highway Truck & Motor Coach — operates more than 60,000 miles (100,000 kilometers) per year 20,000 Miles (32,000 km) Sort Haul — City Transit — operates up to 60,000 miles (100,000 kilometers) per year 6,000 Miles (9,600 km) or three months, whichever comes first Severe Service — Fire Truck or Crash/Rescue Vehicle — operates up to 6000 miles (9,600 kilometers) or under severe conditions 6,000 Miles (9,600 km) or three months, whichever comes first