HOW-TO SECTION Automotive Type Coolants These coolants generally contain high levels of phosphate and silicate, offer no liner pitting protection, and are not suitable for use in Detroit Diesel engines. Methyl Alcohol-Based Antifreeze This must not be used because of its effect on the non-metallic components of the cooling system and its low boiling point. Table 15 Satisfactory Water Limits – Make-Up Water Only Glycol-based Coolants Formulated For HVAC These coolants formulated for Heating/Ventilation/Air Conditioning (HVAC) should not be used. These coolants generally contain high levels of phosphates, which can deposit on hot internal engine surfaces and reduce heat transfer.
heat transfer. For example, a 1.25% concentration of soluble oil increases fire deck temperature 6%. A 2.50% concentration increases fire deck temperature 15%. The use of soluble oil additives may result in engine overheating and/or failure. Chromates Chromate additives are not approved for use in Detroit Diesel engine cooling systems. Chromate additives can form chromium hydroxide, commonly called “green slime.” This, in turn, can result in engine damage due to poor heat transfer.
Cooling systems operated with chromate-inhibited coolant must be chemically cleaned with POWER COOL Twin Pack cooling system cleaner/conditioner Additives Not Recommended The following additives are not recommended for use in MBE 4000 engines. Soluble Oils — Soluble oil additives are not approved for use in Detroit Diesel engine cooling systems. A small amount of oil adversely affects 106 All information subject to change without notice. DDC-SVC-MAN-0041 Copyright © 2009 DETROIT DIESEL CORPORATION Maximum Allowable Parts per Million Grains per Gallon Chlorides 40 2.5 Sulfates 100 5.8 Total Dissolved Solids 340 20 Total Hardness – Magnesium and Calcium 170 10