MAN — Man EPA07 MBE 4000 Engine Operator's Manual

EPA07 MBE 4000 OPERATOR'S MANUAL NOTICE: NOTICE: Prolonged use of the starting motor and engine fuel pump to prime the fuel system can result in damage to the starter, fuel pump and injectors. Engines equipped with starting devices dependent on compressed air or gas reservoirs should always be primed before initial startup. Otherwise, reserve pressure can be exhausted and injectors may be damaged from lack of lubrication and cooling. This may cause erratic engine operation due to the amount of air in the lines and filters from the fuel supply tank to the cylinder head To insure prompt starting and even running, the fuel system must be primed if air has entered the fuel system.

Priming is done by connecting a manual or electric priming pump to the secondary fuel filter adaptor. NOTICE: Under no circumstances should a starting aid such as ether be used to run the engine until the fuel system is primed. Injector damage will result if this method is used. If an external starting aid is used, the heat generated by the external fuel source will cause the injector tips to be damaged when the fuel cools them. The injector plunger and bushing can be scored from running without lubrication. All information subject to change without notice. 21 DDC-SVC-MAN-0041 Copyright © 2009 DETROIT DIESEL CORPORATION