OPERATING INSTRUCTIONS FOR STARTING THE ENGINE Before attempting to jump start the engine, make sure the jumper cables are connected properly (positive to positive, negative to negative ground) and in the proper sequence (negative to negative ground last ). BATTERY EXPLOSION To avoid injury from battery explosion when jump starting the engine, do not attach the cable end to the negative terminal of the disabled battery. Battery Explosion and Acid Burn To avoid injury from battery explosion or contact with battery acid, work in a well ventilated area, wear protective clothing, and avoid sparks or flames near the battery. If you come in contact with battery acid: NOTICE:
Jump starting with voltages greater than those indicated or reversing battery polarity may damage the MCM. Flush your skin with water. NOTICE: Apply baking soda or lime to help neutralize the acid. Failure to connect jumper cables in the proper sequence can result in alternator and/or equipment damage. Flush your eyes with water. Get medical attention immediately. Routine Engine Start Following are procedures for a routine everyday engine start. 28 All information subject to change without notice. DDC-SVC-MAN-0041 Copyright © 2009 DETROIT DIESEL CORPORATION