INSTRUMENTS AND CONTROLS 8 - PARKING BRAKE The parking brake must be applied whenever the opeator leaves the cab, even if for a short time and even if the machine rests on firm and level ground. In dangerous conditions the parking brake can be used also as emergency brake if the service brakes cannot stop the machine. AVOID USING the parking brake as service brake if this is not required by an emergency situation; after stopping the machine in case of emergency, have the braking system inspected by an Authorized Repair Shop. The parking brake acts only on the front axle and is operated through a lever positioned on the operator’s left.
The brake is ap- plied by pulling the lever (1) upwards until the safety coupling snaps; the brake is disconnected by pulling the lower lever (2) and accompanying the lever (1) that automatically returns to its neutral position. The engagement of the parking brake is indicat- ed by the coming on of the warning light on the dashboard. (For further details, see «3.2.2 WARNING LIGHTS»). The application of the parking brake has different functions, ac- cording to the operating mode selected: 1 TRAVEL RKAA0680 With brake applied:
If the parking brake lever (1) is operated with one gear and one travel direction selected, when the lever is released both the gear and the travel function are immediately ac- tive. WORK With brake applied: gearshift-reverse lever: operation inhibited. With brake disengaged: gearshift-reverse lever: operation inhibited. 102 DANGER • gearshift-reverse lever: operation inhibited. With brake disengaged: • gearshift-reverse lever: active TRAVEL-WORK With brake applied: • gearshift-reverse lever: operation inhibited. With brake disengaged: • gearshift-reverse lever: active IMPORTANT