INSTRUMENTS AND CONTROLS 9 - SERVICE BRAKE PEDAL The service brakes are power-assisted; if the engine stops, the effort required to press the pedal and brake increases considerably. This will delay the braking response and make stopping distances longer, which increases the chances of causing accidents that may even be very serious. Do not stop the engine during travel. 10 - ACCELERATOR PEDAL This pedal is positioned on the right with respect to the steering wheel and is suspended. 10 It is used to vary the engine revolution number according to the machine’s travel or operating needs.
Avoiding sudden or abrupt accelerations means reducing con- sumption and extending the service life of both the engine and the machine. RKAA0970 103 DANGER The brake pedal is positioned on the left with respect to the steer- ing wheel and is suspended. The braking action obtained by means of this pedal is proportional to the force applied and is distributed on both axles. ATTENTION • If the machine doesn’t decelerate gradually, or the pedal reaches its end of stroke, stop the machine immediately (using also the parking brake, if necessary), apply the park- ing brake and have the braking system inspected by an Au- thorized Repair Shop. 9 RKAA0971 ATTENTION