Komatsu — 3.3.1.2 USING THE CHARTS

LIFTING LOADS EXAMPLES The examples are not referred to specific machines and load values are expressed in units. 1 st Example Given a 180-unit load, to be lifted starting from a height corresponding to an angle of 35° and with boom lenght indicator matching C , point X must be found, i.e. the point where the angle line (35°) and the boom extension line cross.

Point X is in the area corresponding to 200 units (more than 180) and therefore is within the lifting capacity of the machine, up to the maximum angle allowed by the machine, since the center of gravity of the load is always on the right of line “ A The load can be lowered to the ground and released as long as the boom is retracted enough to keep the center of gravity of the load within the area delimited by line “ A ' -' ./ , ) ( + * , ) ( + * , ) ./ 109 ATTENTION , , -     )  1 ),  ,    ,