LIFTING LOADS 6 - Following the chart guide network, draw two lines corresponding to the boom lenght indicator and to the boom angle indicator. If the two lines cross at point “ A ”, that is, within the area or on its right, the load is within the stability limits. If the two lines cross on the upper (point “ A1 ”) or left line (point “ A2 ”) delimiting the area, it is still possible to lift the load, but several precautions must be taken. If the lines cross in one area, but the load exceeds the weight value relevant to that area, do not lift the load. Before releasing the load, make sure that the machine is within the maximum distance allowed by the chart.
Always retract the boom first and then lower the load. Do not invert this operation sequence. ' -' ./ , ) ( + * , ) ( + * , ) ./ 108 D ANGER , - 0 -' - 0 + , , , ,