Komatsu — 3.6.2.2 STARTING WITH COLD ENGINE OR IN COLD CLIMATES

USE OF THE MACHINE su Utility Dealer for the “COLD ARRANGEMENT” configu- ration. Do not use any fluid or product that facilitate the cold start- ing of the engine, since these are ether-based and may cause explosions. Turn the ignition key to the preheating position and make sure that the warning light « » comes on; when the warning light goes out, proceed as follows: 1 - Slightly press the accelerator pedal and turn the ignition key to position « » (START) for maximum 15 seconds.

2 - As soon as the engine starts, release the ignition key, which will automatically return to position « », and let the engine RWA01970 132 DANGER RWA01990 DANGER run at a minimum speed of approximately 950-1050 rpm, in order to warm the engine up gradually. ATTENTION • If the engine does not start at the first attempt, repeat oper- ations 1 and 2 after waiting at least 30 seconds, so that the starter cools down. RWA01980 ATTENTION