Komatsu — 3.6.4 HEATING THE HYDRAULIC OIL

USE OF THE MACHINE 3.6.3 WARMING THE ENGINE 1 - After starting the engine, let it warm up before starting work. 2 - The ideal warming up of the engine is achieved with a constant speed of approximately 1000 rpm and can be checked on the digital scale provided on the dashboard, which indicates the overheating with red bars. 3 - To reduce the time necessary to warm up the engine, accelerate now and then, up to maximum 1800 rpm. 4 - While warming up the engine, check the colour of the exhaust gas and be careful to anomalous noises or vi- brations; any abnormal situation must be examined thoroughly and its cause must be immediately eliminated.

3.6.4 HEATING THE HYDRAULIC OIL When warming up the engine, especially in the cold season, it is advisable to heat also the hydraulic system oil. For this purpose, when the coolant temperature has reached approximately 60°C, proceed as follows: 1 - Lift the boom slowly and completely for several times. 2 - Extend and retract the boom completely for several times. 3 - Fold and dump the equipment completely for several times. The hydraulic oil must be heated gradually and carefully; if the machine isn’t warmed up properly before using the control lever, the response of the hydraulic components may be slow and cause unexpected accidents. 133 ATTENTION