Komatsu — 3.6.5.2 MAXIMUM IMMERSION DEPTH

USE OF THE MACHINE 3.6.5.2 MAXIMUM IMMERSION DEPTH If it is necessary to work with the machine immersed in water or on river banks or sea shores, always check the water depth and the current flow. Make sure that the surface on which you are working is sufficently firm. If it is necessary to work with the machine immersed in water, make sure that the maximum depth does not exceed 40 cm; working in deeper water may cause serious damage. After moving or working with the machine immersed in water, on the seashore, or on river banks, always remove any mud or sand from the fulcrum pins of the stabilizers and the equipment that have been im- mersed and provide for additional lubrication.

136 DANGER )   ATTENTION