Komatsu — 3.6.5.1 MOVING ON SLOPES

USE OF THE MACHINE 3.6.5.1 MOVING ON SLOPES Before starting work on slopes, always check the functionality of the brakes and of the parking brake. Avoid engaging the high gears. Do not move downhill with the gearshift in neutral, but keep always the low gears engaged. NON-COMPLIANCE WITH THESE RULES MAY CAUSE THE OPERATOR TO LOSE CONTROL OF THE MA- CHINE. Avoid using the declutch push button. When working on slopes some precautions should be taken to avoid risks for the operator and anyone in the vicinity; the checks and operations to be carried out are the following:

1 - Always check the work area for snow, landslips, gravel, loose ground and anything that may suddenly modify the work con- ditions and the stability of the machine. 2 - When travelling downhill or uphill without load, engage the forward gear and travel with boom lifted, in transport position (Figures A - B). A 30 cm RKA01100 B 30 cm RKA00861 3 - When travelling downhill or uphill carrying a load, always keep the boom directed upwards (travelling forward uphill and backward downhill) (Fig. C).

C 4 - Carry out any lateral movement on a flat surface at the begin- ning or at the end of the slope; if this is not possible, move obliquely, keeping the machine axis as parallel to the slope directrix as possible. Do not move too obliquely, or, even worse, with the machine axis rotated by 90° with respect to the slope directrix. RKA01731 135 DANGER