Komatsu — 3.9.3 LIFTING THE MACHINE

TRANSPORTING THE MACHINE ON OTHER VEHICLES 3.9.2 TRANSPORT 1 - Check the overall dimensions of the means of transport; the height, width and weight of the means of trans- port - machine included - must be compatible with the road and any tunnel, underpass, bridge, electric or tele- phone line that may be found on the way. 2 - Keep to the regulations in force regarding signals, speed limits, road traffic, authorizations, etc. 3.9.3 LIFTING THE MACHINE To lift the machine, use exclusively equipment with suitable capacity. The mass of the machine is indicated on the CE identification plate. Always keep at a safety distance while the machine is being lifted.

The manoeuvres must be carried out only by the person responsible for these operations, who must fol- low the correct procedure and take all the necessary measures. To lift the machine, use the points indicated, which are symmetrical and indicated by apposite picto- grams. RKAA2300 RKA02180 141 DANGER 1 - Remove the equipment, retract the boom and lower it com- pletely. 2 - Connect the lifting means and make sure that no cable or chain interferes with the cab. NOTE • The lifting points are symmetrical. 3 - Slowly lift the machine a few centimetres from the ground, then check its stability and balance before lifting it completely. RKAA2220