MAINTENANCE NOTES 4.2 MAINTENANCE NOTES Use only Komatsu Utility genuine spare parts. Do not mix different types of oil. Unless specified otherwise, the oils and the coolant used by Komatsu Utility to fill the tanks before the delivery of the machine are the following: FLUID SPECIFICATIONS Engine oil SAE 15W-40 Spec. API CI Hydraulic system oil SAE 10W-30 Spec. API CI Hydraulic system biodegradable oil (Only for machines in which synthetic biodegradable oil type HEES not of plant origin is used) PAKELO GEOLUBE HYDRAULIC EP-46 Hydraulic transmission oil ANDROS FLUID II D TRASMISSIONE Spec. GM DEXRON ® II D Front and rear axle oil 918 SPECIAL TRANSMISSION FLUID 68/F-100 Spec.
UTTO FLUID Braking system oil 921 ANDROS FLUID II D Spec. GM DEXRON ® II D With ambient temperature over -10°C: ASTM D975 no. 2 diesel oil Fuel With ambient temperature under -10°C: ASTM D975 no. 1 diesel oil Radiator 932 - Permanent, ethylene glycol-based antifreeze, with corrosion inhibitor for protection up to -36°C GM DEXRON ® II D (DEXRON ® II D is a registered trademark of General Motors Corporation) 4.2.1 NOTES REGARDING THE ENGINE 4.2.1.1 ENGINE OIL The engine oil must be selected very carefully, since it lubricates the engine, which is the machine’s heart; the main maintenance operations required for the engine oil are the following:
1 - daily check of the oil level; 2 - check of the degree of pollution of the oil; 3 - periodical change. 4.2.1.2 COOLANT The coolant serves to keep the engine at the correct temperature and therefore to ensure optimal operating con- ditions; check the coolant level in the expansion tank daily and top up when necessary. 170