Komatsu — 4.7.1.b CHECKING, CLEANING OR CHANGING THE ENGINE AIR CLEANERS

MAINTENANCE PLAN 4.7.1.b CHECKING, CLEANING OR CHANGING THE ENGINE AIR CLEANERS Remove the air cleaner only after stopping the engine and do not start the engine if the air cleaner is open. Wear safety goggles during the cleaning operations. The filter can be reached after opening the engine hood (see «3.5.1 ENGINE HOOD»). To clean the primary element, proceed as follows: 1 - Release the safety retainer (1), moving it toward the outside. 2 - Rotate the cover (2) anticlockwise by approximately 12.5° and then remove it. 2 3 - Extract the filtering element (3).

4 - Slightly strike the filtering element (3) on the palm of your hand, in such a way as to remove the dust it contains, and blow compressed air on its inner surface, keeping the air jet at a distance of approximately 15 cm and taking care to pre- vent the pressure from exceeding 2 bars. RKAA1390 5 - After the cleaning operations, inspect the filtering surface for damage by introducing a lamp into the cartridge and carefully check the gaskets of the front seals. If the cartridge is dam- aged, replace it. 4 6 - Carefully clean the inside of the filter case (4), taking care to prevent foreign bodies from getting into the suction duct.

3 7 - Put back the filtering element (3), making sure that it fits per- fectly in its seat. RKAA1400 3 RKAA1410 190 DANGER IMPORTANT • The air filtering system consists of a primary filtering ele- ment with considerable capacity and of a secondary car- tridge that ensures additional safety. The primary element can be cleaned with compressed air, while the safety cartridge must be changed. • The filter must be cleaned when the clogging warning light (A) on the dashboard comes on. (For further details, see «3.2.2 WARNING LIGHTS» 4 - AIR CLEANER CLOGGING WARNING LIGHT (Red)). 1 RKAA1380