MAINTENANCE PLAN 4.7.1.c CHECKING AND CLEANING THE CAB AIR FILTER Wear safety goggles during the cleaning operations. The air suction for the ventilation of the cab is protected by a filter positioned on the rear outer side of the cab. This filter blocks all the impurities contained in the air and must be cleaned whenever a decrease in air circulation is observed. To clean the filtering element, proceed as follows: 2 1 1 - Remove the screws (1), remove the outer guard (2) and ex- tract the filtering element (3).
2 - Strike the element slightly on the palm of your hand to elimi- nate the dust it contains and blow compressed air on its sur- faces, keeping the jet at a distance of about 15 cm and making sure that pressure does not exceed 2 bars. RKAA1111 3 RKAA1121 If the machine is provided with air conditioning system, besides the external filter (3) there is also an additional internal filter (6) for air recirculation. This is a filter that holds the impurities contained in the air and it must be cleaned whenever a decrease in air circulation is per- ceived. The filter can be reached from the inside of the cab and to clean the filtering element it is necessary to proceed as follows:
5 1 - Remove the screws (4), remove the outer guard (5) and ex- tract the filtering element (6). 4 4 2 - Strike the element slightly on the palm of your hand to elimi- nate the dust it contains and blow compressed air on its sur- faces, keeping the air jet at a distance of about 15 cm and RKAA2250 192 DANGER making sure that pressure does not exceed 2–3 bars. 3 - Put back the filtering element (6) and the guard (5). 6 IMPORTANT • If the filtering element is excessively clogged or damaged, change it with a new one. RKAA2260