MAINTENANCE PLAN extension and retraction chain gears 4.7.3.c DRAINING THE WATER SEPARATOR Fuel is flammable; do not use naked flames and do not smoke while draining the water separator. If some fuel is spilled, wipe it up immediately. This operation serves to drain the condensate water and must be carried out with full tank, in order to prevent air from entering the fuel supply circuit. The condensate must be drained at the end of work, before the engine has completely cooled down, in order to prevent it from freezing if the temperature drops considerably. The water separator can be reached after removing the engine hood (see «3.5.1 ENGINE HOOD»).
Drain the condensate by loosening the plug (1), waiting until only clear diesel oil flows out. 1 RKAA1530 202 4.7.3.b LUBRICATING THE CHAIN GEAR SHAFTS (Only for 3-section boom version) IMPORTANT • Clean the grease nipples thoroughly before applying the greasing pump. • After lubrication, remove all the grease that may have spread out. 1 - Using a syringe with hose (1) filled with the prescribed grease (see «4.3 FUEL, COOLANT AND LUBRICANTS» and «4.5 LUBRICATION»), lubricate the shafts of the boom IMPORTANT • Inject grease until all the old grease has come out. • Remove any grease that may have spread out and clean the area. RKAA1610 DANGER