MAINTENANCE PLAN are shorter than prescribed, adjust the extension chains again (see « BOOM EXTENSION CHAINS»). 4 - Reassemble all the casing and guards (4) and (5) previously removed, taking care to secure them properly. 5 - Put back the grease nipple (3) and carry out the greasing op- eration. 4.7.8.j CHECKING THE LENGTH OF THE CHAINS (Only for the 3-section boom version) This operation requires the removal of the chains and good knowledge of the operating methods. Contact your Komatsu Utility Dealer for this operation. As well as removing the chains, they will clean them, check their size and perform the final tension adjustment after reinstalling them. 226 NOTE