Komatsu — 4.7.12.c CHECKING AND ADJUSTING THE ENGINE VALVE CLEARANCE AND THE INJECTION TIMING ADVANCE

MAINTENANCE PLAN 4.7.11 MAINTENANCE EVERY 3 YEARS 4.7.11.a CHANGING THE SAFETY BELT The machine is equipped with a seat provided with homologated safety belt. Change the safety belt every three years even if it shows no cuts, worn fabric or damaged seams. Before installing a new belt, make sure that the anchor screws are not worn or corroded. 4.7.12 MAINTENANCE EVERY 3000 HOURS OF OPERATION OR EVERY 3 YEARS 4.7.12.a CHANGING THE ENGINE THERMOSTATIC VALVE This procedure must be carried out by qualified personnel. Have this operation performed by your Komatsu Utility Dealer.

4.7.12.b CHECKING THE ENGINE ANTIVIBRATION AND RETAINING SCREWS This procedure must be carried out by qualified personnel. Have this operation performed by your Komatsu Utility Dealer. 4.7.12.c CHECKING AND ADJUSTING THE ENGINE VALVE CLEARANCE AND THE INJECTION TIMING ADVANCE Since these checks and adjustment operations require the use of special tools, have these operations carried out by qualified personnel supplied by your Komatsu Utility Dealer. 236