GENERAL PRECAUTIONS 2.2.4 UNAUTHORIZED MODIFICATIONS Any modifications made without the authorization of Komatsu Utility can involve hazards. Before making a modification, consult your Komatsu Utility Dealer. Komatsu Utility declines any responsibility for injury or damage caused by unauthorized modifications. 2.2.5 LEAVING THE OPERATOR’S SEAT When leaving the operator’s seat, even if for a short time, make sure that the machine is in a safe position. (See «3.7 PARKING THE MACHINE»). Before leaving the operator’s seat, carry out the following oper- ations in the sequence indicated below: 1 - Lower the equipment to the ground. 2 - Apply the parking brake.
3 - Shift the gearshift-reverse lever to the neutral position. 4 - Stop the engine. (See «3.8 STOPPING THE ENGINE»). RKA00840 If you have to go so far away that you will not be able to see the machine, remove the ignition key and lock the cab. RKA02040 34