PRECAUTIONS TO BE TAKEN DURING WORK 2.4.5 MOVING ON SLOPES Before travelling on inclined surfaces, besides taking all the preacautions recommended for travelling on horizontal surfac- es, it is also necessary to carry out some checks that are funda- mental for the safety and stability of the machine. In particular: 1 - Check the fuel level in the tank; since the machine is going to travel in inclined position, the engine may suck air and stop abruptly, which represents a risk for the operator and for any- one standing in front of the machine. If the engine stops abruptly, apply the parking brakes and im- mediately contact your Komatsu Utility Dealer.
RKA01730 2 - Check the tyre inflation pressure; excessively low pressure may increase the bending of the tyre sidewalls and in limit conditions cause the tyres to slip. CORRECT 3 - Check the area and in particular check if there are grass, lay- ers of leaves, or recent excavations, since in these conditions the machine may run the risk of slipping or overturning. 4 - Check the weather conditions, since fog, rain or wind may cause the machine to slip or overturn (See «2.4.8 WORKING IN WINDY WEATHER CONDITIONS»). For movements that are perpendicular to the slope, the load must be directed upwards.
Do not change direction on slopes and, if possible, avoid travel- ling obliquely; if possible, move laterally at the foot or at the top of the slope. WRONG Do not move laterally or obliquely if the gradient exceeds 10°. Do not travel downhill with the machine in neutral; in this condi- tion it is easy to lose control of the machine and to cause seri- ous injury and even death. RKA01740 43