Komatsu — 2.8.12 PRECAUTIONS CONCERNING THE BATTERY AND THE ALTERNATOR

PRECAUTIONS TO BE TAKEN DURING MAINTENANCE 2.8.10 CHECKING THE COOLANT LEVEL IN THE RADIATOR Let the engine and the radiator cool down to a temperature be- low 42°C before checking the coolant level. If it is necessary to remove the cap with hot engine, wear suita- ble clothes and protections and loosen the cap slowly, in order to release the pressure gradually. RKA00270 2.8.11 USING LAMPS Use only homologated explosion-proof lamps to check fuel, oil, coolant or battery electrolyte levels. Unsuitable lamps can cause fires or explosions. RKA00260 If electric welding operations are to be carried out on the ma- chine, it is necessary to disconnect the battery and also the al- ternator.

The negative (EARTH) cable of the welding machine must be connected near the point where the welding must be carried out, avoiding the interposition of painted parts, bearings, cylin- ders and bushings. 1 RKAA0860 59 2.8.12 PRECAUTIONS CONCERNING THE BATTERY AND THE ALTERNATOR • When repairing the electric system, disconnet the battery in or- der to stop the flow of current. REMOVAL   IMPORTANT • Disconnect first the negative earth cable (–) and then the positive cable (+). At the end of the operation, reconnect first the positive ca- ble (+) and then the negative cable (–).