Komatsu — 2.8.9 RULES TO BE FOLLOWED WHEN REFUELLING OR ADDING OIL

PRECAUTIONS TO BE TAKEN DURING MAINTENANCE 2.8.7 USE OF THE ENGINE DURING MAINTENANCE Before starting the engine, make sure that the parking brake has been applied. Always stop the machine on a firm and flat surface and stop the engine before carrying out any maintenance op- eration or check. During maintenance operations, run the engine only when indispensable. If it is necessary to have the engine running (for example, to wash the cooling circuit or to check the functionality of the alternator), an operator should constantly remain in the cab, in order to be able to stop the engine whenever necessary.

During maintenance operations with running engine, never change the position of the gear lever. Service per- sonnel must not move any control lever. When carrying out maintenance operations, do not touch the moving parts of the machine and avoid wearing large and loose clothes. 2.8.8 PERIODICAL CHANGE OF THE PARTS THAT ARE CRITICAL FOR SAFETY Periodically change the following parts, which are important to prevent fires. Fuel system: fuel delivery and return pipes. Hydraulic system: main delivery pipes of the hydraulic pump. Hydraulic system: work circuit pipes from the distributor to the hydraulic cylinders.

Even if they seem to be in good conditions, these components must be periodically changed with new ones. In fact, these components tend to deteriorate over time. If one of these parts is defective, change or repair it even if the prescribed change interval has not elapsed yet. (See «4.6 PERIODICAL CHANGE OF THE SAFETY-RELATED COMPONENTS»). 2.8.9 RULES TO BE FOLLOWED WHEN REFUELLING OR ADDING OIL Keep away from naked flames while refuelling or adding oil. Always tighten the fuel tank and hydraulic oil tank safety caps securely. Do not use fuel to clean any part of the machine that is dirty with oil or dust.

Always top up the fuel and oil tanks in properly ventilated areas and refrain from smoking. RKA00320 When refuelling, hold the fuel gun firmly and keep it constantly in contact with the filler until you have finished, in order to avoid spilling fuel. Do not fill the tank completely, in order to leave room for the fuel to expand. Spilled fuel or oil make the ground slippery and may cause acci- dents; clean any dirty area carefully and without delay. RKA00310 58