Komatsu — 3.2.5 MACHINE CONTROLS

INSTRUMENTS AND CONTROLS 3 - OPERATING MODE SELECTION UNIT The selector (1) is used to choose among three different operating modes: a - TRAVEL This operating mode allows the machine to travel only; therefore, it inhibits all movements regarding boom, work equipment, stabilizers and frame levelling. When this mode is selected, all the available gears can be used (5 forward + 3 reverse). 1 b - TRAVEL-WORK Besides travel, this operating mode also enables the frame levelling function and the use of boom, work equipment, sta- bilizers.

It is the operating mode that must be used to prepare the ma- chine for lifting operations, to carry out (if necessary) the load balance tests before lifting the load and before moving to reach the unloading point. In this mode only the 1 st and 2 nd gear, both forward and re- verse, are available. This operating mode can be selected with the machine at rest and also in TRAVEL condition; in the latter case, the gears will be shifted down until engaging the 2 nd gear.

RKAA0900 1 RKAA0910 c - WORK This operating mode allows only the movement of the boom and of the work equipment, inhibiting all other functions; it is the mode to be selected for the loading and unloading of the material and must be selected only with the machine at rest and with parking brake applied. 1 RKAA0920 94