CLAAS ARGO K50, K60, K70 — SECTION 2 ELECTRICS

ELECTRICS 2.43 Forward/Neutral/Reverse (FNR) switch assembly Removal To remove the FNR switch assembly (2) carry out the following procedure: 1. Disconnect the vehicle battery. 2. Remove the two socket head screws (5) that secure the FNR switch assembly (2) to the multi- function switch (7). 3. Disconnect the electrical connector (6) from the steering column loom. 4. Remove the FNR switch assembly. Installation 1. Connect the electrical connector (6) to the steering column loom. 2. Position the FNR switch assembly (2) onto the steering column and align with the multi-function switch (7). Insert the two socket head screws (5) and tighten. 3. Reconnect the vehicle battery. 4.

Carry out a test of the Automatic powershift system using procedure laid down in the Operator’s Manual.