. MAINTENANCE SERVICE PROCEDURE CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING outer element. CHECKING CLEANING OUTER ELEMENT NOTICE Before and after cleaning the element, do not leave or keep it in direct sunlight. 1. Remove 6 holders (2), then remove cover (3) and take out outer element (4). 4 - 23 Always wear prot ective glasses, dust mas k, or other protective equipment.
When removing t he air cleaner element fro m the air c leaner bo dy, it is dangerous to pull it out by f When working at high places or where the foothold is poor, be careful not to fall because of the rea ction when pulling out the If outside diameter of dust in dicator (1), clean the air cleane r elemen After cleaning, pre ss the reset button to reset the NOTICE Always wait for the yellow piston in the dust indicator to overlap the red zone on the outside If the element is cle before cleaning the elem aned frequently before t ent. he yellow piston in the dust indicator overlaps t unable to display it become poor.
he red zone on the outside, the air cleaner will be s normal performance and the cleaning effect will In addition, the freq uency of dust stuck to t he element falling ins ide the inner element during the cleaning operation will increas e.