. MAINTENANCE SERVICE PROCEDURE CLEAN AND CHECK RADIATOR FINS WARNING 4 - 35 Always stop th e engine and check that it is not rotating be fore starting cleaning or in spection. When rotatin g the fan, always close the r adiator gr ill to make it i mpossible t If th e radiato r fins are clo gged or di rty, clean and i nspect them 1. Remove four bolts (1 ) at corner s of grill (2), the n open the grill. 2. Clean th e radiator fin s clogged with mud, dust and leaves with i nstead o f compress ed air. REMARK Check the hy draulic cool er hoses. I f any hose is cr acked or hardened by a ge, replace with a ne w hose. Also check and tighten a ll loose hos e clamps.
Run the fan i n reverse to switch the direction of the air and clea n the radiato r fins between the m ain radiator and sub radiator . 1) Remove bolts (1 ) at the fo ur corners of the radiator fins, ction selector valve of the fan stopper (10 mm (0.4 in)). secure with bolts (1). e fan in reverse. ing, return the screws of the heir original positions. ins, 2) then Turn open radiat screws (3) or grill (2). of the dire 3) 4) moto Clos Start r until they e radiator gr the engine contact the ill (2), then and run th stopper (10 m secure with bo e fan in reverse 5) After completing the clean ing, return the direction selecto r valve to t heir original po