Komatsu — CLEAN ENGINE BREATHER ELEMENT

. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN RECOIL SPRING, ASSIST CYLINDER CASE, ADD OIL in. 4 - 74 Remove When re bolts (1), moving th then remo e cover, be ve cover careful (2). not release Insert a scale and check that the oil level is 90 to 11 0 mm ( 3.6 to 4.4 in ) from the bottom ed ge of the inspection po If t he oil is insufficient, add oi CLEAN ENGINE BREATHER ELE MENT ve the hose. e breather (3). 1. 2. 3. 4. 1. Loosen clam p (1) , then remo ve the hose. 2. Remove bolt (2), t hen remov e breather (3 Rinse the whole b compressed air, t reather in hen install i diesel oil or flushing oil. Dry with t.

Check the breath er hose, an d if any deteriorated oil is stuck to the insid e, replac e the hose with a new h ose. REMAR The engine breather e lement is at the front end on t op of the engine (behin d the radiator).