Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — TRANSMISSION

10 Structure, function and maintenance standard SEN00282-01 Unit: mm D65EX, PX, WX-15E0 25 No.

Check item Criteria Remedy 1 R clutch spring (5 pcs.) Standard size Repair limit Replace Free length Installation length Installation load Free length Installation load 69.5 58.7 233.2 N {23.8 kg} 65.3 198 N {20.2 kg} 2 F clutch spring (5 pcs.) 77.0 63.6 95.2 N {9.7 kg} 72.4 81 N {8.2 kg} 3 3rd clutch spring (5 pcs.) 59.0 44.1 146.0 N {14.9 kg} 55.5 125 N {12.7 kg} 4 2nd clutch spring (5 pcs.) 59.0 44.5 142.1 N {14.5 kg} 55.5 121 N {12.3 kg} 5 1st clutch spring (5 pcs.) 59.0 44.3 144.1 N {14.7 kg} 55.5 123 N {12.5 kg} 6 Total thickness of R clutch assembly consisting of 5 discs and 6 plates Standard size Tolerance Repair limit 36.2 ±0.33 32.2 7 Total thickness of F clutch assembly consisting of 7 discs and 8 plates 49.4 ±0.39 43.8 8 Total thickness of the 3rd clutch assembly consisting of 4 discs and 5 plates 29.6 ±0.30 26.4 9 Total thickness of the 2nd clutch assembly consisting of 4 discs and 5 plates 29.6 ±0.30 26.4 10 Total thickness of 1st clutch assembly consisting of 3 discs and 4 plates 23.0 ±0.26 20.6 11 Thickness of clutch disc 3.4 ±0.1 2.6 12 Thickness of clutch plate 3.2 ±0.1 2.9 13 Wear of transmission input shaft seal ring Width 3.0 –0.01 –0.03 2.70 Thickness 2.3 ±0.10 2.15 14 Backlash between R/F/2nd/1st sun gear and planetary pinion 0.11 – 0.30 15 Backlash between 3rd sun gear and planetary pinion 0.11 – 0.29 16 Backlash between planetary pin- ion and internal teeth of ring gear 0.12 – 0.33 17 Backlash between R carrier and internal teeth of ring gear 0.14 – 0.44 18 Backlash between F carrier and internal teeth of ring gear 0.14 – 0.38 19 Backlash between 1st carrier and internal teeth of ring gear 0.14 – 0.39