SEN00949-00 50 Disassembly and assembly 7. Using push tool [6], press fit bearing (9). a While turning roller (8), press fit the bear- ing. 8. Install spacer (5) and tighten bolt (4). 3 Bolt: 278 ± 32.4 Nm {28.3 ± 3.3 kgm} 9. Supply oil to the carrier roller. 5 Carrier roller: 0.24 l (GO140B) 10. Fit the O-ring to cover (3) and install them to the roller, and then install snap ring (2). 11. Tighten plug (1). 22 D65EX, PX, WX-15E0