Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — TRANSMISSION

10 Structure, function and maintenance standard SEN00282-01 Power transmitting route Forward 1st speed q When the transmission is set to the forward 1st speed, the F clutch and 1st clutch are engaged. The power transmitted from the torque converter to input shaft (1) is then trans- mitted to output shaft (21). q F carrier (10) and 2nd and 3rd carriers (11) are connected by a spline, and rotate as one unit. Accordingly, the rotation of F carrier (10) is transmitted through 2nd planetary pinion (13) to 2nd ring gear (15). q The F clutch is actuated by the oil pressure applied to the F clutch piston, and holds F ring gear (4).

The 1st clutch is actuated by the oil pressure applied to the 1st clutch piston, and holds 1st clutch inner drum (18). q Since 2nd ring gear (15) and 1st carrier (16) are meshed with each other, the power trans- mitted to 2nd ring gear (15) is transmitted to 1st planetary pinion (17). q Since 1st ring gear (18) is held by the 1st clutch, the power transmitted to 1st planetary pinion (17) is transmitted through 1st sun gear (20) to output shaft (21). q The power from the torque converter is trans- mitted to F planetary pinion (3) via input shaft (1) and F sun gear (2).

q Since F ring gear (4) is held by the F clutch, the power transmitted to F planetary pinion (3) to rotate F carrier (10) on the inside of F ring gear (4). D65EX, PX, WX-15E0 27