Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — REMOVAL AND INSTALLATION OF PIVOT SHAFT ASSEMBLY

50 Disassembly and assembly SEN00950-00 Removal and installation of pivot shaft assembly 1 Installation q Carry out installation in the reverse order to removal. Special tools [*1] 3 Pivot shaft mounting bolt: 455 – 565 Nm {46.5 – 58 kgm} [*2] a Assemble seal (2) as follows (see diagram bel- low). 1) Turn over the seal so that the embossed letters (a) on the seal are on the inside. 2) With the seal turned over, insert the seal on pivot shaft (1). a When inserting the seal, be careful not to dam- age the surface. Removal 1. Remove track frame assembly. For details, see "Removal of track frame assembly." 2. Sling pivot shaft assembly (1). 3.

Remove mounting bolts, then forcing screws [1], raise pivot shaft assembly and pull out. [*1] 4 Pivot shaft assembly: 90 kg (D65EX) 100 kg (D65PX) [*3] a Press fit ring (3) using tool P . a Press fitting force: 18.6 kN {1.9 ton} 4. Remove seal (2). [*2] 5. Remove ring (3). [*3] D65EX, PX, WX-15E0 27 Symbol Part No. Part name Necessity Q’ty New/remodel Sketch P 791-430-1200 In staller assem bly t 1 790-101-2102 P uller t 1 790-101-1102 P ump t 1