Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — TRANSMISSION CLUTCH ECMV

10 Structure, function and maintenance standard SEN00282-01 Outline of ECMV ECMV and proportional solenoid q The ECMV consists of 1 pressure control valve and 1 fill switch. q For each ECMV, 1 proportional solenoid is installed. The proportional solenoid generates thrust shown below according to the command cur- rent from the controller. The thrust generated by the proportional sole- noid is applied to the pressure control valve spool to generate oil pressure as shown in the figure below. Accordingly, the thrust is changed by controlling the command current to operate the pressure control valve to control the flow and pressure of the oil.

q Pressure control valve This valve receives the current from the trans- mission controller with the proportional sole- noid, and then converts it into oil pressure. q Fill switch This switch detects that the clutch is filled with oil and has the following functions. 1. Outputs a signal (a fill signal) to the controller to notify that filling is completed when the clutch is filled with oil. 2. Keeps outputting signals (fill signals) to the controller to notify presence or absence of oil pressure while oil pressure is applied to the clutch. Current of propulsion solenoid-thrust charac- teristics Thrust of proportional solenoid - oil pressure characteristics Region A:

Before shifting gear (when draining) Area B: During filling Range C: Pressure regulation Range D: During filling (During triggering) Point E: Start of filling Point F: End of filling ECMV and fill switch q For each ECMV, 1 fill switch is installed. As the clutch complete filling, the fill switch is turned “ON“ by the pressure of the clutch. This signal starts increasing the oil pressure. a The logic is so made that the controller will not recognize completion of filling even if the fill switch is turned “ON“ during triggering (Range D). D65EX, PX, WX-15E0 35