Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — TRANSMISSION CLUTCH ECMV

SEN00282-01 10 Structure, function and maintenance standard Operation of ECMV Before shifting gear (when draining) (Range A in chart) q ECMV is controlled with the command current sent from the controller to the proportional solenoid and the fill switch output signal. The relationship between the proportional solenoid command current of ECMV, clutch input pressure, and fill switch output signal is shown below. q Under the condition where any current is not sent to proportional solenoid (1), pressure con- trol valve (2) drains the oil from clutch port (A) through drain port (dr). Since oil pressure is not applied to pressure detection valve (3) at this time, fill switch (4) is turned “off“.

Region A: Before shifting gear (when draining) Area B: During filling Range C: Pressure regulation Range D: During filling (During triggering) Point E: Start of filling Point F: End of filling a The logic is so made that the controller will not recognize completion of filling even if the fill switch is turned “ON“ during triggering (Range D). 36 D65EX, PX, WX-15E0