10 Structure, function and maintenance standard SEN00282-01 Outline Main relief valve q The main relief valve is keeping each oil pres- sure circuit of the transmission and the brake below the set pressure. Set pressure: 3.31 MPa {33.8 kg/cm 2 } (Engine at rated speed) Torque converter relief valve q The torque converter relief valve maintains the oil pressure in the torque converter inlet circuit always below the set pressure in order to pro- tect the torque converter from abnormally high pressure. Set pressure:
0.83 MPa {8.5 kg/cm 2 } (Cracking pressure) Operation of torque converter relief valve q The oil relieved by the main relief valve flows from port (C) into the torque converter and the same time, passes through orifice (b) of spool (2) and enters chamber (D). When the circuit leading to the torque con- verter becomes filled with oil, the oil pressure starts to rise. Operation Operation of main relief valve q The oil from the hydraulic pump passes through the filter and enters port (A) of the relief valve. It then passes through orifice (a) of spool (6) and enters chamber (B). When the oil from the pump fills the circuit, the oil pressure starts to rise.
q As the oil pressure going to the torque con- verter rises, the oil entering chamber (D) pushes piston (9). The reaction force moves spool (2) to the right to open the circuit between port (C) and port (E). When this happens, the oil at port (C) is relieved to port (E) and drains to the oil tank. The oil pressure at port (C) at this point is 0.83 MPa {8.5 kg/cm 2 } (cracking pressure). q As the oil pressure in the circuit rises, the oil entering chamber (B) pushes piston (4). The reaction force compresses valve spring (7) and moves spool (6) to the left to open the circuit between port (A) and port (C).
When this happens, the oil at port (A) is relieved to port (C) and flows from port (C) to the torque converter. The oil pressure at port (A) at this point is 3.31 MPa {33.8 kg/cm 2 } (engine at rated speed). D65EX, PX, WX-15E0 39