SEN00282-01 10 Structure, function and maintenance standard Lubrication relief valve 1 Unit: mm No. Remedy Replace 1 2. Piston 3. Spring 4. Forward clutch housing q The oil leaving the torque converter passes through the oil cooler built in the radiator lower tank. It then goes through the lubrication relief valve and lubricates the transmission and PTO. Outline A: From oil cooler B: Drain C: Drain q The lubrication relief valve is installed to the right side face of the forward clutch housing. It keeps the lubricating oil pressure below the set pressure. Set pressure: 0.05 – 0.15 MPa {0.5 – 1.5 kg/cm 2 } Cracking pressure:
0.29 MPa {3.0 kg/cm 2 } 40 D65EX, PX, WX-15E0 Check item Criteria Lubrication relief valve spring Standard size Repair limit Installation e length load 11.4 N 25.2 {1.16 kg} Free length Installation length Installation Fre load 26 23.7 12.0 N {1.22 kg}